其他配件
CNC刀把的細部領配件,拉桿、螺栓、螺帽多用裝配於刀把本體後完整其功能。止水環則是搭配標準筒夾及HER止水型螺帽達到HER刀把中心出水的目的。而扳手的選用形式,取決於刀把螺帽的鎖位造型不同,則有相對應的適用型扳手。延長桿為延長刀把長度使用,桿部後裝於刀把前端,桿部前端則可放入刀具。測試棒是主要是用來測試主軸偏擺精度的特殊刀把。
其他配件
CNC刀把的細部領配件,拉桿、螺栓、螺帽多用裝配於刀把本體後完整其功能。止水環則是搭配標準筒夾及HER止水型螺帽達到HER刀把中心出水的目的。而扳手的選用形式,取決於刀把螺帽的鎖位造型不同,則有相對應的適用型扳手。延長桿為延長刀把長度使用,桿部後裝於刀把前端,桿部前端則可放入刀具。測試棒是主要是用來測試主軸偏擺精度的特殊刀把。
Our Quality
普慧刀把品質
| Material | hardness | Surface roughness | Cryogenic treatment | Taper shank accuracy | |
|---|---|---|---|---|---|
|
Steep Taper NiCrMo HSK / Premium Chucks Higher Grade | 55～58 Hrc Depth of Min. 0.8 mm | RA. 0.15 μm | 180 Degrees | AT3 or Better than DIN69893 |
| other brands | CrMo NiCrMo | 50～55 Hrc Depth of Min. 0.6 mm | RA. 0.2-0.4 μm | Nil or Only Sub-Zero (-90) | AT4 or Out of DIN69893 |
| Deflection accuracy | Grinding equipment | inspection method | Dynamic balance | ||
|---|---|---|---|---|---|
|
|
Same as Indicated in Catalogue | State of the Art from Swiss | 100% Checked with Certified Gauge by Trained Technicians | Actual Balanced with Balanced Machines | |
| other brands | Often Different as Indicated in Catalogue | Normal Grinder | Radon Inspection with Non Certified Gaugeby Non Trained Emplyees | Only Pre-Balanced but Claimed Balanced |
Cryogenic Treatment
The Austenite remaining inside the knife can be turned into Martensite, and its variable structure can reach 97% ~ 98%. The picture on the right is a metallographic diagram of two pieces of the same material but different heat treatment. If the knife handle is treated with cryogenic treatment, its life and stability far exceed those of untreated material. The company's products are HY, CR, PFC and so on.
Left | Metallographic diagram after ultra-cold treatment
Right | Metallographic diagram without ultra-cooling treatment